360°Automatic Self-leveling laser 5 Lines 6 Points ,Horizontal and Vertical Laser Cross Line
Laser Level Self-Leveling 360 Horizontal Vertical . Formed by transmitting laser beam through prism light guide system laser surface, project and the horizontal and vertical laser lines to achieve the measurement. 360 degrees, all directions, no dead Angle, time saving. Efficient, good effect, suitable for many scenes.
Widely used for brick laying, table installation, painting, stair laying, woodworking or hanging decoration installation.
Measurement Model: 5 lines
Precision: +- 1.5mm / 5m
Type: Vertical & Horizontal Lasers
Product name: laser level
Laser line color: red
Available work with receiver/detector: Yes
Outdoor mode: Yes
Slash function: Yes
360 degree rotary: Yes
Micro adjustment: Yes
Packing: 1 plastic box (or 1 cloth box) and one carton box
Damping self-leveling system: The laser level movement will make the laser lines vibrated. Damping compensation system could reduce the vibration time, align the laser lines as quickly as possible, solve the problem of shaking lines. More flexible, greatly improve work efficiency!
TILT slash function: Can make tilt slash lines at any angles, need to comply with the rotary joint / adapter
6 Laser enhanced points: Higher brightness laser line with the enhanced point, crossing the middle, keeping outdoor laser enhanced point vertical accuracy, simpler construction work.
Generation smart chip. The intelligent measuring volume reached the highest precision, 60% more than a common laser level.
DC4.5 (AA1.5 X3) (NOT INCLUDED IN THE PACKAGE) / Adapter / Lithium battery
Could work with laser receiver / detector
360 degrees rotary laser
Outdoor mode: when it works outdoor with a laser receiver, it helps to find the lines easier.
Put 3 of 1.5A alkaline batteries (or lithium battery) into the battery box or plug the adapter into laser level; adjust the legs to make sure that the round bubble is in the center
Turn the ON/OFF switch, the self-leveling functions when the power light is on, in the meanwhile, so as the laser line
V-button controls the vertical lines. The floor point lights when the vertical line is on. H-button controls the horizontal line
Press "outdoor" , then it can work with laser receiver.
Press "outdoor" and hold it for 3 seconds, then it can make tilt slash lines.
The instruments will puzzle with an alarm when it is over 3 degrees. At this time, the leg / tripod should be adjusted, making sure that the bubble retries to the center.
Charging: Plug-in type, the adapter can be plugged into the current with the voltage of AC 220V±10%, 50HZ
There will be no any battery(even lithium battery) delivered in the package.
Plastic case OR cloth box (It depends on the packing type you choose): 1 pc.